Eternal Inverter 
Are you annoyed by the poor working condition of the product? Are you anxious about the short battery life? To this end, we have introduced the MPPT solar charge controller L series combined with E-Hybrid technology. In addition to the traditional functions, some unique advantages will be mentioned next:
"E-Hybrid" technology
Hybrid technology can directly convert sunlight into electric energy. The most remarkable feature can be summed up in eight words: “Direct Drive Load, Complementary Battery”: that is, in the case of sufficient PV, directly drive the applications, and the remaining electricity charges the battery; In the case of insufficient PV, PV and battery complement each other in real time to drive the loads. In this regard, can be divided into the following benefits:
1.Through energy management, PV and battery energy complement each other in real time, and the battery life is longer.
2.Through the optimal energy controlled output, the battery energy runs in one direction, and the battery will only be in one state of charging/discharging, so that the battery life will be longer.
3.It can work without battery and directly drive the load to run.
- You can choose to form a PVhousehold appliance system with 24V/48VDC electrical appliances, and expand the application such as PVceiling fans, PV air coolers, PV refrigerators, etc.
Different from the traditional MPPT solar charge controller, our product not only adds a multi-purpose load interface, but also changes the wiring mode.
Multipurpose load interface:
- Normally open mode: output 24V for a long time, and can be connected with low-voltage DC loads such as DC fans and DC refrigerators.
- Light control mode: Turn on the lighting mode when there is no light; A load that you want to run without light.
- Residual electricity mode: When the two conditions “PVinput is greater than inverter load or battery energy storage is greater than 80%” occur at the same time or only one of them occurs, the residual electricity can be used for Air to Water , residual electricity water pumping and residual electricity heating.
These three modes break through the choice that MPPT only has the normally open mode in the market, and can bring more convenience and choices to everyone.
Different wiring modes:
In this picture, we can see that the traditional connection method is to connect the inverter to the battery, which will lead to the battery being discharging while charging, and it cannot be used 100%; The E-Hybrid Solar Charge Controller supplies power to the battery alone, and also has a separate interface to the inverter.
The wiring advantages of E-Hybrid Solar Charge Controller are mainly reflected in the following aspects:
- Efficient &stable: it can effectively manage and control the solar charging process, ensure the stable charging process and improve the charging efficiency.
- High safety: the wiring design is reasonable, which can effectively prevent potential safety hazards such as short-circuit, over-charge and over-discharge, and protect the safety of the battery and the whole system.
- Intelligent management: E-Hybrid solar chargecontroller has intelligent identification function, which can automatically identify the battery voltage and system configuration and make adjustments as needed.
- Simple operation: clear wiring steps, simple operation, convenient for users to quickly install and debug.
- Strong compatibility: support various types of batteries and solar module.
However, it is not enough to pay attention to the wiring problem. We also need to think from a more macro perspective, that is, the use of energy. After all, wiring is only a link in the process of energy transmission and utilization, and the overall utilization efficiency and sustainability of energy are what we should really pay attention to.
First of all, it can be seen from the above two figures that the utilization rate of E-Hybrid solar energy system is at least 30% higher than that of the traditional solar energy system, and solar energy is converted into electric energy more effectively, thus improving the overall energy utilization efficiency.
Secondly, it is very important to meet the growing energy demand. Whether in the peak period of power demand or in areas without electricity, E-Hybrid solar energy system can provide more stable and reliable power supply, which helps to reduce dependence on traditional energy sources.
Finally, for users and enterprises using PV power generation, improving PV utilization rate means more self-generated electricity and less electricity expenses, thus improving economic benefits.
To sum up, this MPPT Solar charge Controller has significantly improved the power generation efficiency and stability of the solar system with its efficient maximum power point tracking technology. It not only has excellent performance and reliability, but also uses RS485 communication protocol, with its own WIFI module connected to mobile APP remote monitoring and LED display screen to view various parameters in real time, which brings users a convenient operation experience.
Looking forward to the future, we will continue to devote ourselves to technological innovation and upgrading of products to meet the ever-changing market demand and provide users with perfect technical support and after-sales service. Choose our MPPT Solar Charge Controller, and you will have an efficient, stable and easy-to-manage solar system, which will bring more convenience and value to your life and work.