6.2 kW Single Phase On/Off Grid Hybrid Inverter Charger
ES-6.2K Series is an On/Off grid hybrid solar inverter which can face to various environments. Rated output power is 6500W. PV, mains power and battery complement each other seamlessly in real time. With E-Hybrid technology, ACDC coupled with each other, not only can the service life of the solar system be guaranteed, but also the high efficiency can be guaranteed.
E-Hybrid Technology
Equipped with MPPT solar charge controller, its output is pure sine wave alternating current, and apply the complete E-Hybrid intelligent complementary technology to form a micro-energy network system through photovoltaic, mains electricity and batteries, and all kinds of energy sources complement each other in real time (non-switching), thus maximizing the utilization of solar energy.
Efficient power generation
E-Hybrid tech , ACDC are coupled with each other.
Clean & stable pure sine wave AC .
The output power factor is 1.0 and the power utilization rate is high.
Built-in 120AMPPT, maximum 6500W (for 6.2 kW) .
High PV input voltage range 60-550VDC
Compatible with 50/60HZ
Safe and reliable
Wall-mounted installation, easy to cope with harsh environment.
Industrial heat dissipation design, high efficiency and safety.
Automatic identification of battery voltage
Adopt multifunctional high-definition LCD screen
Smart grid automatic adaptation
Over-current protection/Over-voltage protection/Under-voltage protection/Over-temperature protection
Smart management
Intelligent battery charging design optimizes battery life .
WIFI&GPRS module realizes remote monitoring, used for IOS and Android.
Built-in intelligent chip and algorithm to maximize the use of PV energy.
A key to restore the factory settings
It can run without battery
Built-in lithium battery automatic activation
Support a variety of customization requirements
Specifications
MODEL | ES-6.2K |
Phase | 1-phase |
Maximum PV Input Power | 6500W |
Rated Output Power | 6200W/6200VA |
Maximum Solar Charging Current | 120A |
GRID-TIE OPERATION | |
PV Input(DC) | |
Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
Start-up Voltage /Initial Feeding Voltage | 60VDC/90VDC |
MPPT Voltage Range | 60-450VDC |
Maximum input Current | 22A |
GRID OUTPUT(AC) | |
Nominal Output Voltage | 220/230/240VAC |
Output Voltage Range | 195.5-253VAC |
Nominal Output Current | 27.0A |
Power Factor | >0.99 |
EFFICIENCY | |
Maximum Conversion Efficiency(DC/AC) | 98% |
TWO LOAD OUTPUT POWER | |
Full Load | 6200W |
Maximum Main Load | 6200W |
Maximum Second Load(battery mode) | 2067W |
Maximum Load Cut Off Voltage | 52VDC |
Maximum Load Return Voltage | 54VDC |
OFF-GRID OPERATION | |
AC INPUT | |
AC Start-up Voltage /Auto Restart Voltage | 120-140VAC/180VAC |
Acceptable Input Voltage Range | 90-280VAC or 170-280VAC |
Frequency Range | 49~51±1HZ |
Maximum AC Input Current | 40A |
PV INPUT(DC) | |
Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
MPPT Voltage Range | 60~450VDC |
Maximum Input Current | 22A |
BATTERY MODE OUTPUT(AC) | |
Nominal Output Voltage | 220/230/240VAC |
Output Waveform | Pure sine wave |
Efficiency (DC to AC) | 94% |
BATTERY & CHARGER | |
Nominal DC Voltage | 48VDC |
Maximum Solar Charging Current | 120A |
Maximum AC Charging Current | 100A |
Maximum Solar+AC Charging Current | 120A |
HYBRID OPERATION | |
PV INPUT(DC) | |
Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
Start-up Voltage /Initial Feeding Voltage | 90VDC/120VDC |
MPPT Voltage Range | 60~450VDC |
Maximum Input Current | 22A |
GRID OUTPUT(AC) | |
Nominal Output Voltage | 220/230/240VAC |
Output Voltage Range | 195.5-253VAC |
Nominal Output Current | 27.0A |
AC INPUT | |
AC Start-up Voltage /Auto Restart Voltage | 120-140VAC/180VAC |
Acceptable Input Voltage Range | 90-280VAC or 170-280VAC |
Maximum AC Input Current | 40A |
Maximum AC Charging Current | 100A |
GENERAL | |
PHYSICAL | |
Dimension,D*W*H(mm) | 420*350*110 |
Cartoon Dimension,D*W*H(mm) | 500*415*180 |
Net Weight (kgs) | 8.9 |
Gross Weight(kgs) | 10.0 |
INTERACE | |
Communication Port | RS232/RS485/WIFI/GPRS/LITHIUM BATTERY |
ENVIRONMENT | |
Humidity | 5% to 95% Relative Humidity(Non-condensing) |
Operating Temperature | -10℃-50℃ |
STANDARD | |
Compliance Safety | CE |