Eternal Inverter 
Low voltage solar controller (Energising router )
L-40A Series is a solar controller with low pressure designed for residential use.Maximum charging current 40A. It could maximizes energy extraction from the solar panel and more accurately tracks the maximum power point of the solar panel, thus significantly improving charging efficiency.Lightweight design, easy installation, low noise and friendly environment.
E-hybrid Power
When there is sunlight, the solar energy directly drives the use of household loads, and the excess electricity is stored in the battery to face emergencies; When the weather is cloudy or rainy, which leads to insufficient sunlight, part of the solar energy is complementary to the battery, which will not break the solar energy and simply use the battery to supply power
Multipurpose load port
Compared to the traditional solar controller, the E-Hybrid solar charge controller is equipped with a multi-function load port, which is normally open mode, light control mode and residual electricity mode. Normally open mode refers to the normal output 24V load, can be open for a long time; Light control mode refers to the situation that lighting is turned on when there is no light, or it is hoped that the load will run when there is no light. Residual electricity mode means that when one of the conditions that the photovoltaic input is greater than the inverter load or the battery energy storage is more than 80% occurs simultaneously or only, residual electricity can be used to make water by air, pump water by residual electricity and make heat by residual electricity.
Change wiring mode
It will never harm the battery! As can be seen from the figure, the wiring of the traditional MPPT solar charge controller is very complicated, and it needs to connect the battery and then supply power to the loads through the inverter, which will lead to the consequences of charging and discharging at the same time, which will not only affect the battery life, but also fail to use 100% electricity; The E-Hybrid solar charge controller is connected to the battery for storage alone, and the load runs through the inverter alone, which protects the battery life and outputs electricity with maximum efficiency at the same time
Leading feature
1. E-Hybrid Tech, Complementary of PV & Battery
2. Three-stage charging optimizes battery performance
3. Compatible for PV systems in 12V or 24V
4. Maximum charging current up to 40A
5. Automatic battery voltage detection
6. Supports lithium battery and various lead-acid batteries, AGM and gel battery
Solar ceiling fan
Solar ceiling fan is a ceiling fan driven by solar energy. It converts solar energy into electric energy through the installed solar panels, thus driving the fan blades to rotate. Solar ceiling fan has the characteristics of energy saving, no pollution and flexible installation and combined with low-voltage solar controller (energising route) to drive other loads. It can play a role in family houses, outdoor places 、areas without electricity
or some areas with unstable power supply. For example, in rural courtyards, school classrooms in remote areas or camping bases, solar ceiling fans bring cool air to people, improve environmental comfort and reduce energy consumption and cost.
Solar refrigerator
Solar refrigerator is an innovative refrigeration equipment. It uses solar panels to convert solar energy into electric energy, which provides power for the operation of refrigerators. This kind of solar refrigerator has obvious advantages of energy saving and environmental protection, which reduces the dependence on traditional power grid and combined with low-voltage solar controller (energising route) to drive other loads, is especially suitable for areas with unstable power supply or areas without electricity. Solar refrigerators usually have good thermal insulation performance and efficient refrigeration system, which can effectively store food, medicine and other items. For example, in some remote mountainous areas, field research stations or residential areas without electricity, solar refrigerators bring great convenience to people’s lives and ensure the freshness of food and the quality of medicines.
Solar TV
Solar TV is an innovative TV equipment. Its biggest feature is that it can use solar energy to supply power, thus getting rid of the complete dependence on traditional power supply and expensive electricity bills. This kind of TV is usually equipped with efficient solar panels, which can convert solar energy into electric energy and store it for the normal operation of the TV and combined with low-voltage solar controller (energising route) to drive other loads. Solar TV has obvious advantages of energy saving and environmental protection, which reduces the consumption of non-renewable energy and carbon emissions. For example, in some areas with unstable power supply or areas without electricity, solar TV can guarantee people’s entertainment and information acquisition needs.
Solar&DC Freezer
Solar freezer is an innovative and environmentally friendly refrigeration equipment. It mainly relies on solar energy to provide the energy needed for operation. By installing efficient solar panels, solar energy is converted into electric energy and stored to provide power for the refrigeration system of the freezer. Solar freezers are outstanding in energy saving, which effectively reduces energy consumption and dependence on traditional electricity and combined with low-voltage solar controller (energising route) to drive other loads. In some areas with insufficient power supply or areas without electricity, such as mountainous areas and pastoral areas, solar freezers can play an important role in ensuring fresh storage of food. For example, in some areas without power grid coverage, solar freezers allow local residents to preserve food for a long time and reduce food waste. Moreover, its performance is constantly optimized, and the refrigeration effect is increasingly stable and reliable.
Specifications
| Model | L-40A |
| DC output | |
| Max Charging Current | 40A |
| System Voltage | 12/24V (Automatic recognition) |
| DC Max. Output Power (Automatic recognition of battery voltage) | 12V: 480W |
| 24V: 960W | |
| – | |
| – | |
| Battery Type | Gel / AGM / Liquid / LiFePO4 / Li-NMC |
| PV input | |
| Max. PV input power | 12V: 533W |
| 24V: 1066W | |
| – | |
| – | |
| Max. open circuit PV Voltage | 100V |
| MPPT Voltage Range | 12V: 20~80VDC |
| 24V: 37~105VDC | |
| – | |
| – | |
| General spec. | |
| Multifunctional DC output mode | Normal power on mode / Excess power output mode / Light control mode |
| Max tracking efficiency | >99.9% |
| Max charge conversion efficiency | 0.98 |
| Ingress Protection | IP30 (indoor & ventilate) |
| Operating Temperature Range | -10~55℃ |
| Operating moisture range | 5% to 95% |
| Max Operating Altitude | 2000m |
| Communication | RS485/wifi |
| Display | LED |
| Dimensions (mm) | 220×200×85 |
| Weight (Kg) | 1.5 |
| Protection | Over current / over voltage / undervoltage / high temperature |
